TDK Corporation has introduced tube magazines for several ring core chokes series as an alternative packaging to the blister tray in a cardboard box.
The post TDK Introduces Tube Magazines for Various Series of Ring Core Chokes for Automatic Pick and Place appeared first on In Compliance Magazine.
Rohde & Schwarz has developed the industry’s first ASIC-based zone triggering, implemented in the new MXO series oscilloscopes. This new functionality enhances the oscilloscopes’ ability to precisely isolate events that are difficult or impossible to detect with traditional oscilloscope triggers.
The post Rohde & Schwarz Further Strengthens its Oscilloscope Portfolio appeared first on In Compliance Magazine.
ARC Technologies LLC, a Hexcel Company, has developed a reputation for providing an unrivaled range of advanced materials that help military platforms operate and survive in a high-end threat environment.
The post Hexcel is Delivering RF and EMI Technologies for the Current and Future Fight appeared first on In Compliance Magazine.
Explore the correct use of UL iQ for Electrical Insulation Systems and how proper utilization can save time and money during product development.
The post Practical Engineering: Properly Specifying Electrical Insulation Systems appeared first on In Compliance Magazine.
The IEEE Standards Association announced that several testing facilities operated by atsec Information Security have been officially recognized to conduct testing in accordance with the requirements of the IEEE’s Medical Device Cybersecurity Certification Program.
The post First Test Facilities/Product Recognized Under IEEE Cybersecurity Certification Program appeared first on In Compliance Magazine.
Young EMC engineers often wonder where some of the rules of EMC originated. The answer is frequently found in the history of the EMC Society and the early work of a cadre of intelligent and active engineers who spearheaded the formation of the Society. This article highlights the story of some of these engineering professionals and their contributions to the engineering solutions practiced by today’s EMC engineers.
The post It’s All About the People: The Pioneers of Today’s EMC Society appeared first on In Compliance Magazine.
Ken Wyatt's blog explores DIY radiated emissions testing. He breaks down the gear you'll need—think spectrum analyzers and special antennas—and shows how to set up your own test space without breaking the bank. It's all about catching EMC issues before the big, pricey lab tests.
The post EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 1 – Equipment Needs appeared first on In Compliance Magazine.
While articles and papers have been written in the past concerning the protection of high voltage power grids throughout the world, there has not been sufficient emphasis on the near-term plans to harden existing facilities. This article provides a specific cost-effective approach to protect existing power system assets over time from the threats of HEMP and IEMI.
The post Hardening the Power System from HEMP and IEMI appeared first on In Compliance Magazine.
This study examines the impact of complex magnetic permeability in 3-D simulations of toroidal ferrites and magnetic cores for EMC applications, revealing its importance and limitations at different frequencies.
The post 3-D Modeling and Characterization of Ferrite and Nanocrystalline Magnetic Cores for EMI Applications appeared first on In Compliance Magazine.
Explore the impact of the return path impedance and the return current level on common-impedance coupling between circuits. The measurements presented were performed on a custom PCB containing audio, video, and high-current circuitry, where the return paths for each circuit were selectively shared with other circuits.
The post Common-Impedance Coupling appeared first on In Compliance Magazine.
Humidity control in relation to an ESD control program continues to be misunderstood across the industry. Humidity does help in the reduction of charge accumulation, but it does not control charge accumulation to reduce the risk to sensitive items.
The post Does An ESD Control Program Require Humidity Controls? appeared first on In Compliance Magazine.
This article discusses using the reciprocity theorem in EMC troubleshooting, particularly for immunity issues. It describes a case study involving a smart meter and demonstrates how emission measurements can help identify susceptibility problems, highlighting the usefulness of walkie-talkies in testing.
The post Using Reciprocity Theorem to Troubleshoot Immunity Issues appeared first on In Compliance Magazine.
Sometimes, it takes time and patience to develop solutions to hard problems. But thankfully, dedicated scientists and researchers are never deterred when facing challenges. Instead, challenges energize them, frequently producing some amazing outcomes.
The post Making Plastic Waste Into Polymers for Electronic Devices? Who Knew appeared first on In Compliance Magazine.
As part of its effort to stay ahead of new and emerging technologies, the U.S. Federal Communications Commission (FCC) will vote later this month on proposed rules to address the growing use of artificial intelligence (AI) in generating illegal robocalls.
The post FCC to Vote on New Rules for AI-Generated Robocalls appeared first on In Compliance Magazine.
The U.S. Federal Communications Commission (FCC) is set to vote on final rules to integrate advanced communications technologies into intelligent transportation systems (ITS).
The post FCC to Move Forward on Auto Safety Spectrum Rules appeared first on In Compliance Magazine.
Würth Elektronik offers its WE-MXGI – a power inductor with unprecedented properties. Extremely low core losses, combined with the lowest winding resistance (RDC value) of all comparable products on the market to date, give rise to maximum efficiency in DC/DC converter applications.
The post Würth Elektronik Presents its WE-MXGI Series Power Inductors for DC/DC Converters appeared first on In Compliance Magazine.
The blog discusses various types of bandwidths used in EMC measurements, including receiver bandwidth, resolution bandwidth (RBW), and video bandwidth (VBW). It explains their differences, importance in testing, and challenges in measuring low-amplitude signals at high frequencies.
The post Military and Aerospace EMC: Bandwidths Used in Measurements appeared first on In Compliance Magazine.
In partnership with the University of Georgia’s International Biomedical Regulatory Sciences Program (UGA), the U.S. Food and Drug Administration (FDA) will hold its 11th Annual Medical Device Regulations Conference (MDRC) on August 21st.
The post FDA Annual Medical Device Regulations Conference Set appeared first on In Compliance Magazine.
The Antenna Measurement Techniques Association (AMTA) has given its Distinguished Achievement Award to Professor Manuel Sierra Castañer.
The post Manuel Sierra Castañer Awarded Distinguished AMTA Honor appeared first on In Compliance Magazine.
EMITE and Rohde & Schwarz continue their collaboration to enhance EMITE’s Over-the-Air (OTA) measurement solutions by fully integrating the latest test capabilities of the R&S CMX500 multi-technology, multi-channel one-box signaling tester. The integration enables besides support of LTE, FR1 and FR2 also full compliance with the cutting-edge WLAN standard IEEE 802.11be as well as 5G RedCap.
The post EMITE and Rohde & Schwarz Join Forces to Support OTA Measurements on Wi-Fi 7 and 5G RedCap appeared first on In Compliance Magazine.
