Editor's Picks

Reduced-Delay IIR Filters

Rick Lyon's Blog on DSPRelated -

This blog gives the results of a preliminary investigation of reduced-delay (reduced group delay) IIR filters based on my understanding of the concepts presented in a recent interesting blog by Steve Maslen [1].

Development of a Reduced-Delay 2nd-Order IIR Filter

Maslen's development of a reduced-delay 2nd-order IIR filter begins with a traditional prototype filter, HTrad, shown in...

Somewhat Off Topic: Deciphering Transistor Terminology

Rick Lyon's Blog on DSPRelated -

I recently learned something mildly interesting about transistors, so I thought I'd share my new knowledge with you folks. Figure 1 shows a p-n-p transistor comprising a small block of n-type semiconductor sandwiched between two blocks of p-type semiconductor.

The terminology of "emitter" and "collector" seems appropriate, but did you ever wonder why the semiconductor block in the center is...

Reducing IIR Filter Computational Workload

Rick Lyon's Blog on DSPRelated -

This blog describes a straightforward method to significantly reduce the number of necessary multiplies per input sample of traditional IIR lowpass and highpass digital filters.

Reducing IIR Filter Computations Using Dual-Path Allpass Filters

We can improve the computational speed of a lowpass or highpass IIR filter by converting that filter into a dual-path filter consisting of allpass...

A Lesson In Engineering Humility

Rick Lyon's Blog on DSPRelated -

Let's assume you were given the task to design and build the 12-channel telephone transmission system shown in Figure 1.

Figure 1

At a rate of 8000 samples/second, each telephone's audio signal is sampled and converted to a 7-bit binary sequence of pulses. The analog signals at Figure 1's nodes A, B, and C are presented in Figure 2.

Platform interference

The EMC Blog -

Every manufacturer seemingly wishes to add some form of wireless capability into new and existing mobile, household, industrial, scientific, and medical product. This trend toward the “Internet of Things” is in full swing and with it comes problems with EMI. That is, EMI from the product itself, that interferes with sensitive telephone, GPS/GNSS, and Wi-Fi/Bluetooth receivers. This is called “platform interference” and it’s a big problem for manufacturers.


Subscribe to www.rfmentor.com aggregator - Editor's Picks