Aggregator

Oscilloquartz has expanded its collaboration with Iridium Communications by adding support for Iridium® positioning, navigation, and timing (PNT) services to more products in its synchronization ..

Knowles Corporation, a manufacturer of specialty electronic components, including high-performance capacitors, radio frequency (RF) filters, advanced medtech microphones, and balanced armature speake..

The global hybrid aircraft market was valued at USD 401.1 million in 2025 and is estimated to grow at a CAGR of 37.7 percent to reach USD 11.2 billion by 2035, according to recent report by Global Market Insights Inc.

Blueshift, a U.S.-based technology leader in advanced materials, will showcase PhaseBlue® 1500 at the European Microwave Week 2026 to spotlight how high performance substrates are designed for engineers seeking to reduce weight and signal loss while enabling more flexible approaches to RF, antenna and PCB design.

Amphenol RF is pleased to announce the expansion of their emerging PFAS-free portfolio with a variety of BNC connector and adapter options.

Skyworks has received all necessary regulatory clearances to proceed with its proposed combination with Qorvo, bringing the approximately $22 billion transaction close to completion. The companies no..

DroneShield, a global leader in advanced counter-drone technology, has been awarded an Indefinite Delivery, Indefinite Quantity (IDIQ) contract supporting Joint Interagency Task Force 401 (JIATF-401)..

Werbel Microwave has introduced the WMC-0.3-8-30dB-S, a wideband directional coupler designed for RF signal sampling from 300 MHz to 8 GHz with 30 dB nominal coupling. The coupler offers 23 dB typica..

Amphenol RF is expanding its PFAS-free portfolio with a variety of BNC connector and adapter options. PFAS-free BNC interconnects utilize PEEK insulators instead of traditional PTFE ones which provid..

Keysight Technologies has introduced a 20 GHz PSG XG7-class analog signal generator with two fully independent channels in a single 2U chassis, increasing test capacity without requiring additional r..

Choose the wrong absorber and even a well-built test setup can produce misleading results. Compare ferrites, polyurethane foam, conductive polymers, and magnetic sheets by frequency range, absorption, and durability to match the right material to your application.

The post Material Matters: Selecting the Right Absorbing Materials for EMC and Compliance Testing appeared first on In Compliance Magazine.

Satellite communications are playing an increasingly important role in both civilian and military communication networks. As a result, the importance of a task considered extremely challenging from a..

As lithium-ion battery energy storage systems scale up, so does the risk when something goes wrong. Drawing on FDNY's frontline experience, this article breaks down thermal runaway, propagation, and the codes, testing, and installation practices that determine whether a battery failure stays contained or turns catastrophic.

The post Why the Hazards of Lithium-Ion Batteries Require a Different Approach to Safety appeared first on In Compliance Magazine.

Constant-power loads break the assumptions behind linear circuit analysis, and the fallout shows up as undersized batteries, excess heat, and stressed inverters. New drivetrain testing on a Kia EV-6 reveals why batteries, inverters, and motors need to be modeled together, not separately, to get electrified powertrains right.

The post The Impact of Power Flow Analysis on an Electrical System appeared first on In Compliance Magazine.

As chiplets shrink toward 10 micron pitches, standard CDM testers can no longer verify their ESD withstand voltage before 2.5D/3D assembly. This first installment breaks down why existing test methods fall short and maps out the emerging paths, from contact-based CDM to correct-by-design verification, for closing the gap.

The post 2.5D/3D Integration Challenges: Bare Die Testing appeared first on In Compliance Magazine.

Seeed Studio has launched two new additions to its XIAO family of compact development boards, the XIAO nRF54LM20A Sense and XIAO nRF54LM20A, for battery-powered IoT applications including wearables, ..

Explore how intelligent automation is transforming cable and harness testing. This whitepaper examines the limitations of manual validation and explains how automated high-voltage testing, multi-point switching, guided workflows, and digital traceability can improve throughput, repeatability, quality, and compliance while supporting increasingly complex cable assemblies and production requirements.

The post The Future of Cable Testing: Why Intelligent Automation Is Replacing Manual Validation appeared first on In Compliance Magazine.

Expand your view of the global testing landscape as UL Solutions closes its purchase of Eurofins Scientific's electrical and electronics business. The deal adds laboratories and accreditations across EMEA, Asia, and the United States, and signals what a larger combined network could mean for market access in EMC, wireless, and medical device testing.

The post UL Solutions Inc. Completes Acquisition of Eurofins Scientific’s Electrical & Electronics Business appeared first on In Compliance Magazine.

The FCC and HHS want to know whether today's RF exposure rules are enough, and the FCC is reopening an inquiry it closed in 2019. See what each agency is asking, what evidence they want to see, and how to get your comments on the record.

The post FCC, HHS Seek Comment on RF Safety Issues appeared first on In Compliance Magazine.

New FDA draft guidance aims to make PMA submissions more consistent and reviews smoother. See what the electronic submission template offers device manufacturers, how it supports the review process, and where to send your feedback.

The post FDA Publishes Guidance for its Electronic Submission Template for Med Device PMA Applications appeared first on In Compliance Magazine.