ESD flooring systems fail more often from misunderstanding than bad materials. This article walks through nine common pitfalls — from confusing anti-static with ESD-safe to poor grounding and installation shortcuts — and how to avoid each one.
The post Common Pitfalls with ESD Flooring Systems appeared first on In Compliance Magazine.
Rohde & Schwarz expands the R&S BBA300 broadband amplifier family with new 500 W and 1000 W models covering 1–6 GHz in single-band operation. Designed for automotive, aerospace, and defense EMC testing — including HIRF applications — the solid-state units offer high linearity, mismatch tolerance, and modular system integration.
The post Rohde & Schwarz Expands R&S BBA300 Broadband Amplifier Family with 500 W and 1000 W Models for EMC Testing appeared first on In Compliance Magazine.
Tackle radiated emissions before heading to the test lab. This practical guide covers the essential workbench toolkit — near field probes, RF current probes, and spectrum analyzers — including DIY options and affordable commercial choices for identifying noise sources and reducing cable emissions.
The post EMC Bench Notes: Some Starting Tools appeared first on In Compliance Magazine.
The FCC is set to vote on new rules tightening the integrity and security of electronic device testing, including restrictions on labs in countries lacking trade agreements with the U.S. and new requirements for foreign employee disclosure, enforcement procedures, and expedited review for trusted labs.
The post FCC to Vote on Security of Electronic Device Testing appeared first on In Compliance Magazine.
The FDA is inviting medical device developers to participate in the READI-Home Innovation Challenge, seeking proposed solutions for home-use medical technologies that reduce hospital readmissions, with selected participants receiving direct regulatory feedback to refine their designs.
The post FDA Announces Innovation Challenge for Home Healthcare Devices appeared first on In Compliance Magazine.
Learn the essentials of EMC troubleshooting for product designers with this introductory column from Kenneth Wyatt. It explains why EMC failures derail product launches, highlights core design challenges, and offers foundational resources to help engineers start diagnosing emissions and immunity issues directly on the bench.
The post Just Starting Out In EMC? appeared first on In Compliance Magazine.
The FCC is accepting applications for its Honors Engineer Program, a one-year paid opportunity for recent engineering graduates to tackle cutting-edge issues in 5G, broadband, public safety, and emerging communications technologies — with potential for permanent employment.
The post FCC Seeking Recent College Grads for Honors Engineer Program appeared first on In Compliance Magazine.
The FCC is seeking certified distributors to provide telecommunications and internet equipment to low-income deaf-blind individuals in California, following the withdrawal of the state's current distributor — with certification opportunities available through 2027 and into the next five-year term through 2032.
The post FCC Accepting Certification Applicants for Deaf-Blind Equipment Distribution appeared first on In Compliance Magazine.
EMC PARTNER AG introduces the ESDEX series — ESD generators available in 8 kV, 16 kV, and 30 kV configurations for industrial, automotive, defense, and avionics compliance testing. Modular architecture, a 4" capacitive touchscreen, and USB-C fast charging make this a modern, ergonomic solution for IEC 61000-4-2, ISO 10605, MIL-STD-461 CS118, and RTCA DO-160 Section 25 applications.
The post EMC PARTNER AG Launches ESDEX Series ESD Generators for Compliance Testing Up to 30 kV appeared first on In Compliance Magazine.
Radiated emissions testing is a critical—and complex—step in EMC compliance. This practical guide walks engineers through preparation, equipment setup, and troubleshooting strategies to help identify and resolve emissions issues before they become costly certification failures.
The post Mastering Radiated Emissions Testing: Tips for Success in EMC Compliance appeared first on In Compliance Magazine.
The FCC has added foreign-made consumer internet routers to its Covered List following an interagency determination that such devices pose unacceptable national security risks. The action cites supply chain vulnerabilities and links to recent cyberattacks—including the Volt, Flax, and Salt Typhoon incidents—that targeted critical U.S. infrastructure.
The post FCC Adds Foreign-Made Consumer Routers to Covered List appeared first on In Compliance Magazine.
NIST has released two new quick start guides supporting adoption of its Cybersecurity Framework 2.0. The final SP 1308 addresses enterprise risk management and workforce management, while draft SP 1347 covers informative references and NIST tools. Public comments on SP 1347 are open through May 6th.
The post NIST Releases Two New CSF Quick-Start Guides appeared first on In Compliance Magazine.
Changing enclosures, PCB layouts, component sources, or software doesn't mean the schematic changed—but it may mean your EMC certification did. This installment of Standards Practice breaks down which hardware modifications trigger the need for retesting, and why skipping it can be a costly mistake.
The post When to Re-Test appeared first on In Compliance Magazine.
The FCC has cleared its first four drone systems from the Covered List after the Department of War determined they pose no national security risk. The move opens a conditional approval pathway for UAS manufacturers seeking U.S. import and sale authorization.
The post FCC Removes Certain Drones from Covered List appeared first on In Compliance Magazine.
The FDA has finalized guidance on premarket submission requirements for weight loss medical devices, covering non-clinical testing, clinical study design, and benefit-risk analysis. Developers of intragastric implants, aspiration therapy systems, and neuromodulators will want to review the agency's recommendations closely.
The post FDA Finalizes Guidance on Weight-Loss Devices appeared first on In Compliance Magazine.
Global markets don’t run on assumptions—they run on accredited data. ISO/IEC 17025 laboratory accreditation gives manufacturers the consistency, accuracy, and credibility regulators expect. See why accreditation has become a competitive advantage across every major industry.
The post Navigating Accreditation: Why Testing Laboratories Need to Meet Global Standards appeared first on In Compliance Magazine.
The FCC has adopted new rules to accelerate high‑speed network deployment, eliminating certain filing requirements and streamlining technology transition processes. The changes also grant blanket authority to grandfather legacy services, freeing resources to expand modern broadband infrastructure and transition communities away from outdated copper networks.
The post FCC Finalizes Measures to Advance Broadband Rollout appeared first on In Compliance Magazine.
Medical electrical equipment standards are complex—and noncompliance is costly. This article breaks down the top 10 barriers manufacturers face when navigating IEC 60601 and related standards, from EMC testing and isolation diagrams to risk management and software documentation, with practical guidance to streamline certification and avoid delays.
The post Top 10 Barriers Manufacturers Face with Medical Standards appeared first on In Compliance Magazine.
The IEC 60601 family of standards is undergoing its most significant update in decades. This article explains how the 4th Edition of IEC 60601‑1 restructures safety, performance, terminology, and collateral requirements—and what these changes mean for medical electrical equipment development, conformity assessment, and future regulatory pathways.
The post The IEC 60601 Family of Standards and the 4th Edition of IEC 60601‑1 appeared first on In Compliance Magazine.
Product documentation can protect manufacturers—or expose them to serious liability. This article explains best practices for managing product safety records across the product lifecycle, including defensive writing, document retention, post‑sale reporting, and structured document management programs that demonstrate proactive commitment to safety, regulatory compliance, and product liability risk reduction.
The post Documents Can Be Your Friend or Foe appeared first on In Compliance Magazine.
